Home / Guides

Flooring cost in Charlotte: what drives the price of hardwood, vinyl plank and tile

The price on the sample board is the material only. Most of the difference between two flooring quotes is in the work around it: removal, subfloor preparation, stairs and trim. Compare written quotes and choose which contractors get your phone number.

The short answer

A flooring quote is material plus installation, multiplied by the area, plus everything the per-square-foot price leaves out: taking up the old floor, preparing the subfloor, transitions, baseboards, stairs and moving furniture. Those extras are where quotes differ. Flooring needs no building permit in North Carolina unless the structure under it has to be repaired. We do not print a Charlotte price range because we have not found one backed by a method.

How a flooring quote is built

  1. Measured area. Square feet of each room, plus closets, plus an allowance for cuts and waste.
  2. Material price per square foot, for the exact product.
  3. Installation labor per square foot, which depends on the material and the method.
  4. Underlayment or moisture barrier, where the product needs one.
  5. Removal and disposal of the old floor.
  6. Subfloor preparation.
  7. Trim and transitions.
  8. Stairs, priced per step.
  9. Furniture and appliances.

Advertised per-square-foot prices usually cover items 2 and 3. Items 5 to 9 are where the total is decided.

Material: what changes besides the price per foot

Solid hardwoodNailed downNeeds a wood subfloor. Can be sanded and refinished several times. Sensitive to moisture.
Engineered hardwoodNailed, glued or floatedA real wood surface on a layered core. Can go over concrete with the right method.
Luxury vinyl plankFloated or gluedTolerant of moisture. Shows subfloor unevenness if the floor is not flat first.
LaminateFloatedA printed surface on a fiberboard core. Needs a flat subfloor and protection from standing water.
TileSet in mortarThe most labor per square foot. Needs a stiff, flat base and often a backer or membrane.
CarpetStretched over padThe pad is a separate choice with its own price.

Within each type, grades vary widely. A quote should name the manufacturer, product line, color and thickness, and for vinyl plank the thickness of the wear layer. "Hardwood" or "LVP" alone is not a product.

Your subfloor decides more than you expect

What your floor is built on changes which products can be used and how much preparation is needed.

  • Concrete slab. Solid hardwood cannot simply be nailed to it. Engineered wood, vinyl plank, laminate and tile can go over a slab, but moisture in the concrete has to be checked first, and low spots filled. Ask each contractor how they will test for moisture, and what they will do with the result.
  • Wood subfloor over a crawlspace or basement. Any product can go down, but squeaks, soft spots and old water damage need fixing first, and dampness below affects wood floors above. Ask whether the contractor will look at the crawlspace.
  • Second floors. Wood subfloor, usually dry, but tile needs the floor to be stiff enough not to crack it.

Tell every contractor which of these you have, room by room. If you do not know, say so, and ask them to check before pricing.

The lines quotes leave out

Check each quote for these. If a line is missing, ask whether it is included or extra.

  1. Removal of the old floor. Carpet is quick. Glued-down wood, tile and sheet vinyl are slow, and tile removal makes dust.
  2. Disposal.
  3. Subfloor preparation. Leveling, patching, replacing damaged sections, screwing down squeaks. Often quoted as "if needed" with no price. Ask for a unit price.
  4. Baseboards and shoe molding. Removed and reinstalled, replaced, or left in place with trim added in front. Painting afterward is usually not included.
  5. Transitions between rooms and at doorways, and door trimming where the new floor is thicker.
  6. Stairs. Priced per step, and far more per square foot than the flat. Treads, risers and nosing in a matching product can be a large line of their own.
  7. Furniture, appliances and toilets. Who moves them, and who reconnects a refrigerator water line or resets a toilet.
  8. Waste allowance. Extra material for cuts. Patterns such as herringbone and diagonal layouts need more. Ask what percentage each contractor used.
  9. Acclimation and return visits for wood products.

Measuring so that quotes match

Contractors who measure the same house often report different square footage, because one included closets and the pantry, or one added a larger waste allowance. To line quotes up:

  • List the rooms you want done, and name them the same way for everyone
  • Ask each contractor for the net measured area and the waste allowance as separate numbers
  • Ask for stairs as a count of steps, not as square feet
  • Ask which direction the boards will run, since that changes waste and appearance

The heated square footage of your home is not the number to use. Kitchens under cabinets, bathrooms, and rooms you are not changing all come out.

Refinish or replace hardwood?

If you already have solid hardwood, sanding and refinishing is a different and usually smaller job than replacing it. It suits floors that are worn, scratched or the wrong color but structurally sound. Replacement makes sense where boards are cupped or rotten from water, where the wood has already been sanded too thin, or where you are changing the layout. Ask a contractor who does both to look, and to tell you how much sanding life the boards have left.

Permits and licenses in North Carolina

Laying a new floor is not structural and involves no trade work, so it needs no building permit in a single-family home when the job costs $40,000 or less. Two things can change that:

  • Structural repair. If joists or other load-bearing framing under the floor need repair or replacement, that work needs a permit at any price.
  • Plumbing or electrical changes tied to the job, such as moving a drain or adding heated-floor wiring, are permit work, and they need state-licensed trades.

A general contractor license is required when a job costs $40,000 or more. Most flooring jobs fall below that, so ask for written proof of insurance and a written workmanship warranty. See our permit guide.

What a complete flooring quote lists

  • Rooms included, net area and waste allowance
  • Manufacturer, product line, color, thickness and wear layer
  • Installation method and underlayment
  • Removal and disposal of the old floor
  • Subfloor preparation: what is included, and unit prices for more
  • Moisture testing, for slabs and wood products
  • Baseboards, transitions and door trimming
  • Stairs, by the step
  • Who moves furniture and appliances
  • Manufacturer and workmanship warranties, and what voids them
  • Start date, how long rooms are out of use, and payment schedule

Our guide on how to compare contractor quotes explains how to set these side by side.

How QuoteFlash fits in

Tell our agent which rooms, which material and what the floor is built on. The agent works for you. It matches you with up to five local contractors who are insured, and licensed where the state requires it. Their written quotes arrive in one place and the agent points out what each one left out, from removal to stairs. You choose which contractors get your phone number. Free for homeowners; contractors pay when they are matched. Start with flooring quotes in the Charlotte area.

Flooring questions

Do I need a permit to install new flooring in Charlotte?

No, when the job is $40,000 or less and nothing structural is repaired. Repairs to load-bearing framing under the floor need a permit at any price.

Why is the installed price so much higher than the price on the box?

The box price is material only. Labor, removal of the old floor, subfloor preparation, trim, transitions and stairs are all added.

Can hardwood go on a concrete slab?

Solid hardwood is normally nailed to a wood subfloor. Engineered hardwood can be installed over concrete with the right method. Ask each contractor how they would handle moisture.

How do I compare quotes with different square footage?

Ask each contractor for the net measured area and the waste allowance separately, and for stairs as a number of steps.

Should I refinish or replace my hardwood?

If the boards are sound and thick enough to sand, refinishing is usually the smaller job. Water damage or boards sanded too thin point to replacement.

Do contractors get my phone number as soon as I ask?

No. You compare written quotes first and share your number only with the contractors you choose.

One minute now. Up to five quotes to compare.

Get my quotesFree, no obligation, and you choose who gets your number
Contractor in the Charlotte area?Get matched with verified homeowners who are ready for quotes.
Apply for your area