Home / Projects / Windows and doors

Window and door replacement quotes in the Charlotte area

Tell our agent which windows or doors you want replaced. It works for you: it matches you with up to five local contractors who are insured, and licensed where the state requires it, and puts their written quotes side by side. Contractors see your project, not your phone number, until you choose to share it.

How it works

  1. Tell the agent about the openings. How many windows and doors, what is there now (wood, aluminum, vinyl), what is wrong (fogged glass, rot, drafts, sticking), and whether the sizes stay the same. It asks follow-up questions so every contractor prices the same list.
  2. Verify your phone by text code. This confirms the request is real. It does not hand your number to anyone.
  3. Get up to five written quotes. They arrive in one place. The agent lines them up and explains the differences in plain terms.
  4. Ask questions, then choose. Message contractors through QuoteFlash. Only the ones you pick get your phone number.

Contractors pay QuoteFlash when they are matched with you. You pay nothing.

What drives the price of window and door replacement

We do not publish a Charlotte price range. Per-window figures online rarely say what is included, and that is where quotes differ. These are the things that move the number:

  • How the job is counted. Some contractors quote per window, others give one whole-house figure. A per-window price can leave out trim, disposal or a minimum job charge. A whole-house figure can hide which openings cost the most. Ask for both: a line for each opening and a total.
  • Insert or full-frame. An insert replacement fits a new unit inside the existing frame. A full-frame replacement removes everything down to the rough opening, including the frame, sill and exterior trim. Full-frame costs more and shows any hidden rot. Two quotes for different methods are quotes for different jobs.
  • Frame material. Vinyl, fiberglass, composite, wood and clad wood sit at different price points.
  • Glass. Number of panes, coatings, gas fill, grids, and tempered or obscure glass where it is needed.
  • Type, size and height. A standard double-hung costs less than a casement, bay, bow or custom shape. Upper-story openings take more labor, and brick, siding and stucco each change the trim work.
  • Condition of the opening. Rotted sills, damaged framing and missing flashing are often invisible until the old unit is out.
  • Doors. A new slab in the old frame is a smaller job than a pre-hung unit with a new frame and threshold. Sidelights, transoms, sliding and French patio doors, and hardware all add to it.

What a complete window or door quote lists

Use this to check every quote you get, from us or anyone else.

  • A schedule of openings: each window and door by room, with measured size, type and how it opens
  • Brand, product line, frame material, and color inside and out
  • Glass for each unit: panes, coating, gas fill, grids, and which units are tempered or obscure
  • The energy ratings printed on the product label, so two brands can be compared
  • Installation method for each opening: insert or full-frame
  • Interior and exterior trim: reused, replaced or wrapped, and whether it is painted or left primed
  • Flashing, sill pan, insulation around the frame, and sealant
  • Rot repair: the price per opening or per foot, and what it covers
  • Screens, locks and hardware. For doors: slab or pre-hung, threshold, weatherstripping, lockset, and who paints or stains
  • Removal and disposal of the old units
  • Lead-safe work practices, if the house was built before 1978
  • Whether a permit is needed, and who handles it
  • Time from order to installation, days on site, deposit and payment schedule
  • Manufacturer warranty on glass seal, frame and hardware, and a written workmanship warranty, with lengths

The two lines that most often separate a low quote from a high one are the installation method and rot repair. A quote that says neither has not priced them. It has left them for later. For the general method, see how to read a contractor quote.

Window and door permits in Charlotte and Mecklenburg County

North Carolina exempts work on a single-family home costing $40,000 or less from a building permit, with a short list of exceptions. Structural work is one of them, but the statute says in so many words that replacing windows and doors is not. What matters is whether the opening changes.

Replace windows or doors in the same openings, job of $40,000 or lessNo permitThe statute names window and door replacement as work that does not need one.
The same work, job over $40,000PermitThe exemption stops at $40,000. State Fire Marshal guidance confirms this for windows and doors.
Cut a new opening, or make an existing one wider or tallerPermitThis changes the framing that carries the wall above. Adding or replacing load-bearing structure needs a permit at any price.
Repair load-bearing framing found around an openingPermitSame reason. Ask each contractor what happens if this turns up mid-job, and who applies.

No permit does not mean no rules. The exemption only covers work done to the current North Carolina building code. Mecklenburg County Code Enforcement issues building permits; its number for code questions is 980-314-CODE (2633). The rules for other projects are in our permit guide for Charlotte-area home projects.

Does a window installer need a license in North Carolina?

A state general contractor license is required when the job is $40,000 or more. Many window and door jobs come in under that figure, where that license is not required, so "licensed" on its own tells you little. Check what applies at any size: proof of liability coverage, a written workmanship warranty and a local address. At $40,000 or more, ask for the license number and look it up.

One certification does apply by house age. A firm paid to do work that disturbs painted surfaces in a home built before 1978 must be certified in lead-safe practices. Replacing old painted windows and door frames is that kind of work. If your house is older than that, ask each contractor for the firm's certificate.

Things specific to windows and doors in the Charlotte area

Planned communities. Many subdivisions around Charlotte have an HOA that reviews exterior changes, and frame color, grid pattern and door style are common subjects. Windows are generally made to order, so get approval before the order is placed, not after. Ask the contractor for the product sheet and color sample the committee will want.

Local historic districts and landmarks. State law requires a certificate of appropriateness from the local preservation commission before exterior features are changed in a designated historic district, and it lists the type and style of windows and doors among those features. The certificate is required whether or not a building permit is. If your home is in a district, this comes first.

Window and door questions

How much does window replacement cost in Charlotte?

It depends on the number of openings, insert or full-frame installation, frame material, glass and any rot repair. We do not publish a range we cannot stand behind. Several written quotes for the same openings and the same method will give you a real number.

Do I need a permit to replace windows in Charlotte?

Not if the new windows go into the same openings and the job costs $40,000 or less. You do need one if the job costs more than that, or if an opening is added or enlarged, because that changes load-bearing framing.

What is the difference between insert and full-frame replacement?

An insert goes inside the existing frame, which stays in place. Full-frame removes the old frame, sill and exterior trim down to the rough opening. Full-frame costs more and exposes hidden rot. Make sure every quote names the method for each opening.

Does my HOA have to approve new windows or a new front door?

That depends on your community's rules. Many planned communities around Charlotte review exterior changes, so check before you sign and get approval before the order is placed.

Who sees my phone number?

Only the contractors you choose. Contractors see your project details and send written quotes through QuoteFlash. You read them, ask questions in the same place, and decide which contractors get your number.

One minute now. Up to five quotes to compare.

Get my quotesFree, no obligation, and you choose who gets your number
Contractor in the Charlotte area?Get matched with verified homeowners who are ready for quotes.
Apply for your area