How it works
- Describe the system and the house. What you have now, how old it is, what is wrong, and the size of the home. The agent asks the questions a contractor would.
- Verify your phone by text code. This confirms the request is real. It does not hand your number to anyone.
- Get up to five written quotes. The agent lines them up by equipment, size, ductwork, permit and warranty.
- Ask questions, then choose. Message contractors through QuoteFlash. Only the ones you pick get your number.
Contractors pay QuoteFlash when they are matched with you. You pay nothing.
First, which kind of system do you have?
Quotes only compare if they are for the same kind of system. Most homes here have one of these:
- Heat pump. One outdoor unit heats and cools, paired with an indoor air handler. All electric.
- Air conditioner plus gas furnace. An outdoor unit cools; a gas furnace indoors heats and moves the air.
- Dual fuel. A heat pump for most of the year, with a gas furnace that takes over on the coldest days.
- Ductless mini-split. Wall-mounted indoor units with no ducts, often for an addition, bonus room or garage.
Charlotte has a long, humid cooling season and a short heating season. Most homes in the area heat with gas, so the usual setup is an air conditioner paired with a gas furnace, and a heat pump quote is often a change of system type. If a contractor suggests switching type, ask every other contractor to price the same switch.
Many two-story homes have two separate systems, one per floor. Say so up front, and say whether you want one replaced or both.
What drives the price
We do not publish a Charlotte price range, because the figures online come with no method. These are the things that move a quote:
- System type. The four types above are priced differently.
- Size, in tons. Bigger is not better. An oversized system switches on and off too often and removes less humidity, which matters in a Charlotte summer.
- Efficiency. Higher ratings cost more up front.
- Single-stage, two-stage or variable-speed. How finely the system can adjust its output.
- Ductwork. Reused as is, sealed and repaired, or replaced. This can be a large part of the difference between two quotes.
- Where the equipment sits. An air handler in an attic or crawl space takes more labor than one in a closet or garage.
- Electrical and other extras. A new disconnect or breaker, refrigerant lines, drain line and pan, pad or stand, thermostat.
- Warranty. Manufacturer parts coverage and the contractor's own labor coverage are separate.
What a complete heating and cooling quote lists
- Brand and full model numbers for the outdoor unit, the indoor unit and the coil
- Size in tons, and heating capacity
- Efficiency ratings for cooling and heating
- How the size was worked out: a load calculation for your house, or a match to the old unit
- Ductwork: what will be inspected, sealed, repaired or replaced
- Refrigerant lines: new, or existing lines flushed and reused
- Thermostat, drain pan and safety switch, pad or stand
- Electrical work included
- Removal and disposal of the old equipment
- The mechanical permit, any electrical permit, and the inspection
- Manufacturer warranty, who registers it, and the contractor's labor warranty in writing
- Start date, duration and payment schedule
Two lines to look at first: the model numbers and the sizing. If one quote names a model and another says only "3-ton heat pump," you cannot compare them yet. If the size simply copies the old unit, ask why. Insulation, windows and ductwork may have changed since it was installed.
For the full method, see our guide on how to compare contractor quotes.
Permits: every replacement needs one
In North Carolina, replacing a heating or air conditioning system needs a permit at any price. The $40,000 exemption that covers most roof and window replacements does not apply. Mecklenburg County lists the same rule and requires separate permits for heating and air conditioning work and for electrical work.
What that means for you:
- The contractor should apply for the permit. Mecklenburg County issues residential trade permits to licensed contractors online, so the permit itself should not hold up the job.
- The county inspects the work after it is installed. Ask who meets the inspector.
- A quote with no permit line is not a saving. It is a job the county has not been told about.
Rules for other projects are in our permit guide for Charlotte and Mecklenburg County.
Licensing: this trade always requires one
Unlike roofing or flooring, heating and cooling work requires a North Carolina state license no matter what the job costs. The State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors issues it. The only exemption is for minor repairs that do not change the fuel, energy source, venting or piping. A replacement is not a minor repair.
The county cannot issue the permit unless a licensed contractor is doing the work. Ask for the license number and look it up with the board.
Refrigerant: what changed
Federal rules now limit the refrigerants allowed in newly installed home air conditioners and heat pumps. The restriction took effect on January 1, 2025. In practice:
- A new system will use a newer refrigerant than the one in your old system.
- Your existing system can still be repaired. Parts used to repair existing systems are not covered by the restriction.
- If a quote reuses existing refrigerant lines, ask how they will be prepared for the new refrigerant.
This matters most in a repair-or-replace decision. Ask what refrigerant your current system uses and what a recharge costs today.
Repair or replace?
We are paid when a homeowner is matched with a contractor, whichever they decide, so here is the plain version. Replacement makes more sense as a system gets older, as repairs get more frequent, and when a repair involves the compressor or a refrigerant leak. Repair makes more sense when the system is younger and the fault is a single part. If a contractor recommends replacement, ask what the repair would cost and get that in writing too.