Home / Areas / Huntersville

Heating and cooling replacement quotes in Huntersville

Most Huntersville homes are two-story houses with gas heat built between 1990 and 2010. Here is what that means for a replacement quote. Compare up to five written quotes, and you choose which contractors get your phone number.

2003median year built for single-family homes inside Huntersville town limits
2,677 sq ftmedian heated area
3 in 4homes with two full stories or more
Over 9 in 10homes recorded with gas heat

The usual Huntersville job is an air conditioner and a gas furnace

There are about 20,000 single-family homes inside Huntersville town limits. More than nine in ten are recorded with gas heat and ducted forced air. So the typical replacement here is not a heat pump swap. It is an outdoor air conditioner, an indoor coil and a gas furnace, and the first thing to settle is whether you are replacing all three or only the cooling side.

If one contractor prices an air conditioner and coil and keeps the furnace, a second prices a matched air conditioner and furnace, and a third proposes a heat pump, you are holding three different jobs. In a gas-heated Huntersville home a heat pump or dual fuel quote is a change of system type. It is a fair option, but ask every contractor to price it, or none.

Age: a town built mostly between 1990 and 2010

The median home was built in 2003. Nearly six in ten were built between 1990 and 2009, which makes them 17 to 36 years old. About a third were built in 2010 or later, and only about one in ten before 1990.

For a house from the 1990s or 2000s, find out whether the equipment outside is original or has already been replaced once. The label on the outdoor unit usually shows when it was made. An original system from before 2010 may run on R-22, a refrigerant that has not been made or imported in the United States since January 1, 2020. Existing R-22 systems can still be serviced, but it is worth knowing before you pay for a refrigerant repair.

Size and stories: expect a question about two systems

The median heated area is 2,677 square feet and about three in four homes have two full stories or more. A two-story home of that size often has two separate systems, one for each floor, each with its own outdoor unit. Count the outdoor units before you ask for quotes, and say whether you want one replaced or both.

Two systems installed when the house was built are the same age, so a contractor called about one may quote both. Ask for the price each way. Square footage does not set the size of the new equipment. A load calculation does, and each floor is sized on its own.

What to check on a Huntersville quote

  • Which system, and which parts: upstairs, downstairs or both, and air conditioner, coil and furnace or the cooling side only.
  • Model numbers for the outdoor unit, the coil and the furnace, so you can see whether they are a matched set.
  • How the size was worked out for each floor.
  • What happens to the refrigerant lines. In a two-story home they often run inside finished walls and are reused.
  • The permit and the contractor's license number.

The full list of what a complete quote contains is on our heating and cooling page. For the lines that apply to every trade, see how to read a contractor quote.

Permits and licensing in Huntersville

Building and trade permits for Huntersville addresses are issued by Mecklenburg County Code Enforcement (980-314-CODE), the same office that serves Charlotte. North Carolina requires a permit to replace a heating or air conditioning system whatever the job costs, and the installer must hold a state heating and cooling license at any price. The permit cannot be issued unless a licensed contractor is doing the work, so the contractor applies for it, not you. Rules for other projects are in our permit guide for Charlotte and nearby towns.

How QuoteFlash fits in

QuoteFlash is free for homeowners. You describe the house and the system to our agent, which works for you, and verify your phone by text code. You are matched with up to five local heating and cooling contractors who are insured, and licensed where the state requires it. Their written quotes arrive in one place and the agent explains the differences. Contractors pay when they are matched.

Huntersville heating and cooling questions

Do Huntersville homes mostly have heat pumps or gas furnaces?

Gas furnaces. More than nine in ten single-family homes inside town limits are recorded with gas heat, which normally means an air conditioner paired with a gas furnace. Check your own home before assuming: if the outdoor unit runs when the heat is on, you have a heat pump.

How many systems does a typical Huntersville home have?

We do not have a count, but about three in four homes have two full stories or more and the median heated area is 2,677 square feet. Homes like that often have two systems, one per floor. Count your outdoor units and tell each contractor which one you want priced.

Who issues the permit for an HVAC replacement in Huntersville?

Mecklenburg County Code Enforcement. The contractor applies, and the county inspects the work after it is installed. A permit is required at any price.

My Huntersville home was built around 2003. Is the system original?

It may be. Check the label on the outdoor unit for the year it was made. Age alone does not mean it has to be replaced. If a contractor recommends replacement, ask what the repair would cost and get that in writing too.

One minute now. Up to five quotes to compare.

Get my quotesFree, no obligation, and you choose who gets your number
Contractor in the Charlotte area?Get matched with verified homeowners who are ready for quotes.
Apply for your area