If your home is in a community with an owners' association, read its recorded covenants and design guidelines before you sign a contract for a roof, fence, windows or siding. North Carolina's Planned Community Act does not set an approval process or a deadline for these requests. Your community's own documents do. The safe order is: documents, a quote with exact specifications, written approval, any permit or zoning step, then the contract and a start date. The Act does allow an association to fine an owner after a hearing, so skipping the step can cost more than waiting for it.
This page is general information about North Carolina, not legal advice. Your community's recorded documents control, and they differ from one neighborhood to the next.
What state law says, and what it leaves to your community
The North Carolina Planned Community Act is Chapter 47F of the General Statutes. It is the state law for owners' associations in subdivisions. Four points from it matter when you plan a project.
Which communities it covers
The Act applies in full to planned communities created on or after January 1, 1999. A list of its sections, including the association's power to make rules and to fine, the hearing procedure and the lien for unpaid sums, also applies to older communities. A community of 20 lots or fewer is outside the Act unless its declaration says otherwise. Condominiums are not planned communities under this chapter.
Where the rules for your project live
A planned community is created by a declaration, which must be recorded in every county where any part of the community lies. That recorded declaration, often titled covenants, conditions and restrictions, is where a requirement to get approval for exterior changes comes from. Some communities add design guidelines and an application form.
No approval procedure or deadline in the Act
We read the chapter for this and found no section that sets out how a request for an exterior change is reviewed, how many days the association has to answer, or what happens if it does not answer. So if someone tells you that state law gives the association a fixed number of days, or that silence counts as approval, ask where that is written. It may be true for your community, but only because your declaration or guidelines say so.
Fines, and the hearing that comes first
Unless the declaration provides otherwise, an association may impose reasonable fines for violations of the declaration, bylaws or rules, but only after notice and an opportunity to be heard. The Act sets the procedure:
- The owner must be given notice of the charge, a chance to be heard and present evidence, and notice of the decision.
- The hearing is before the executive board, or a panel of members the board appoints.
- A fine may not exceed $100 for the violation. Further fines may follow without another hearing for each day the violation continues more than five days after the decision.
- Fines are treated as assessments, which can be secured by a lien on the lot.
- A panel's decision can be appealed to the full board within 15 days.
Three approvals people mix up
An association's approval, a building permit and zoning are separate. Getting one says nothing about the others. Below, the middle column is North Carolina's permit rule for a single-family home. The last is what a committee will usually want to see.
The full permit rules, town by town, are in our permit guide for Charlotte and nearby towns.
The order that avoids paying twice
- Get the documents. The declaration, any design guidelines and the application form. The management company or board can send them, and the declaration is on record with the county.
- Read the section on exterior changes. Note what needs approval, any stated standards for color, material or height, and whether the documents give a time for a response.
- Collect written quotes that name the product. A committee cannot approve "a new roof." It can approve a named shingle in a named color.
- Submit the application. Keep a copy and note the date and how you sent it.
- Wait for approval in writing. A neighbor on the board saying it should be fine is not approval.
- Handle the permit or zoning step, if your project has one. The contractor normally does this.
- Sign and schedule. If you want to hold a contractor's place earlier, ask for a clause that makes the contract conditional on association approval, and avoid paying for materials until you have it.
What to ask your contractor for
Most of an application is information the contractor already has. Ask for it with the quote:
- The manufacturer's specification sheet for the exact product
- The color name, and a physical sample if the committee wants one
- For a fence or deck, a simple drawing with heights and lengths, marked on a copy of your lot survey
- For windows, the grid pattern and exterior frame color
- The contractor's business name and proof of liability coverage, if the form asks for them
- How long the quoted price holds
The last item matters more than it looks. Quotes expire, and a review can outlast them. Before you submit, ask the association when its committee next meets, and ask each contractor to hold the price until after that date.
Timing it with your quotes
You do not need to pick a contractor before you apply, only a product. If three roofers quote the same shingle line and color, one application covers all three, and you can keep comparing while the committee reviews it.
For the project-specific lines to compare while you wait, see roof replacement, fences and decks, windows and doors and siding and gutters.
If the answer is no, or there is no answer
- Ask for the reason in writing, and for the section of the documents it rests on.
- Ask what would be approved. A different color or height is often a quicker route than an argument.
- If there is no reply, check what your documents say about response times before you assume anything. State law does not fill that gap.
- For a real dispute, talk to a North Carolina attorney who handles community association matters.
South Carolina communities
Everything above is North Carolina law. Communities in Fort Mill, Tega Cay, Lake Wylie and Indian Land run on their own recorded documents and on South Carolina law, which we have not reviewed for this page.
Where QuoteFlash fits
When you describe a project to our agent, mention the association. Ask for quotes that name the exact product and color, since that is what your application needs. The agent works for you. It matches you with up to five local contractors who are insured, and licensed where the state requires it, and puts their written quotes in one place with the differences explained. Contractors pay when they are matched. You pay nothing.