Homes in Matthews at a glance
These figures cover single-family homes inside the town limits, in the Mecklenburg County part of Matthews. Townhomes and condos are left out.
When homes were built
- Before 1990: about 48 percent
- 1990s: about 28 percent
- 2000s: about 16 percent
- 2010 or later: about 8 percent
What the age of homes here means
About three in four Matthews homes were built before 2000, so they are at least 27 years old. Nearly half are 37 or older. If the roof, the heating and cooling system, the water heater or the windows have never been replaced, they are the same age as the house.
- Built before 1990, nearly half of homes. Most of the big items have probably been replaced at least once, so the question is how old the current ones are, not the house. Check the paperwork from your purchase, or look for dates on the equipment labels.
- Built in the 1990s, more than one home in four. Roof, heating and cooling, windows and decks are the questions here.
- Built in 2000 or later, about one home in four. A smaller share than in Huntersville or Ballantyne.
One rule follows from age. A firm paid to do work that disturbs painted surfaces in a home built before 1978 must be certified in lead-safe practices. That covers window, siding and bathroom work. If your house is that old, ask for the certificate. We do not publish how long a roof or a system should last, because it depends on the product and how it was installed. The age is the fact. A contractor who looks at it can tell you the rest.
What size, stories and heating mean
The median heated area is 2,284 square feet. About six in ten homes have two or more stories, and a small share are split-level. Heating is more mixed than in the newer suburbs: about seven in ten homes heat with gas, about three in ten with electricity, and roughly one in five is recorded with a heat pump. So a heating and cooling quote in Matthews may be for a furnace and air conditioner or for a heat pump, and a water heater may be gas or electric. Tell the agent which you have, because the quotes are not interchangeable.
Permits and approvals
North Carolina requires no building permit for work on a single-family home costing $40,000 or less, unless the work involves load-bearing structure, a change to the plumbing layout, the heating and cooling system or wiring. Replacing heating and cooling equipment needs a permit at any price. Mecklenburg County Code Enforcement issues building permits; its number for code questions is 980-314-CODE (2633).
Zoning is the town's. Matthews sets its own fence limits in single-family districts: 4 feet in a required front setback and 6 feet in a required side or rear yard, which is lower than Charlotte allows at the front and rear. The details are on our Matthews fence and deck page. Many subdivisions around Charlotte also have an HOA that reviews exterior changes. See our permit guide.