Home / Guides

Contractor license rules in North Carolina and South Carolina

The two states regulate home contractors very differently, and the line between them runs through the Charlotte area. Here is what each requires, trade by trade, and how to check a license yourself.

The short answer

North Carolina requires a general contractor license when a job is $40,000 or more, and a state trade license for heating, cooling, plumbing and electrical work. Below $40,000 the general contractor law does not apply, so a roofer or fence builder on a smaller job may hold no state license at all. South Carolina sets the bar far lower: roofers, siding installers, flooring installers and other residential specialty contractors must be registered or licensed for work over $500, and a residential builder license applies over $5,000. The rules that apply are those of the state where the house stands.

A contractor who is properly set up for a job in Ballantyne may not be for the same job in Fort Mill or Indian Land, a short drive away. Here is what each state's law says.

North Carolina

General contractors: $40,000 or more

North Carolina law requires a general contractor license when the cost of the job is $40,000 or more. The licensing board puts it this way: "If a project is valued at $40,000 or more, your general contractor must have a license issued by the state." Some websites still quote $30,000. That figure is out of date.

The North Carolina Licensing Board for General Contractors takes complaints against its license holders and can investigate unlicensed work on jobs of $40,000 or more. By its own account it cannot order a contractor to fix a problem or return money, and it cannot fine. Getting money back is a matter for the courts, which is a reason to check before you sign.

Heating, cooling and plumbing: a license at any price

These trades work differently. State law requires a license to do, or offer to do, heating, air conditioning or plumbing work, and it sets no dollar minimum. The only carve-out is for minor repairs and replacements that do not change the energy source, the fuel type, or the routing or sizing of venting or piping. Replacing a heat pump, furnace or air conditioner is not a minor repair. The license comes from the State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors.

Electrical

Electrical contracting, which the law defines as installing, maintaining, altering or repairing electric wiring, devices, appliances or equipment, requires a license from the State Board of Examiners of Electrical Contractors. The licensing section sets no dollar minimum.

Roofing, siding, windows, fences and flooring under $40,000

The general contractor law starts at $40,000, and the trade licenses above cover heating, cooling, plumbing and electrical work. A roof, siding, window, fence or flooring job below $40,000 falls under neither, so the business doing it may not hold a state license. That is not a red flag by itself, but a license cannot do your checking for you. Ask for the legal business name and address, proof of liability coverage, and a written quote that names materials and scope. Our guide on how to read a contractor quote lists the lines to look for.

The $40,000 mark matters for permits as well, and the two rules are not identical. See our permit guide for Charlotte and nearby towns.

South Carolina

South Carolina regulates residential work through its Residential Builders Commission, which covers residential buildings of up to three floors and sixteen units.

Residential builders: over $5,000

Anyone who builds, repairs or improves a residential building, or supervises that work, needs a residential builder license when the cost of the job is more than $5,000.

Residential specialty contractors: over $500

A residential specialty contractor is someone who contracts with a builder or directly with a homeowner to do work in a specialized trade when the job is more than $500. The law lists these trades:

  • Plumbers, electricians, and heating and air conditioning installers and repairers. These three must pass an examination and hold a specialty contractor license.
  • Roofers, vinyl and aluminum siding installers, floor covering installers, insulation installers, masons, drywall installers, carpenters, stucco installers, painters and wallpaperers, and solar panel installers. These hold a specialty contractor registration. The Commission says no examination is required for it.

From the Commission's own guidance:

  • The registration belongs to a person. The Commission registers the individual, not the company. A company name can be attached to that person's registration.
  • Three trades at most. A registrant may work in up to three trades listed on the registration. More than that requires a builder license.
  • A bond above $5,000. A registered specialty contractor doing a job over $5,000, labor and materials together, must have a $5,000 surety bond on file with the Commission.
  • Roofers work above the deck. The roofer classification is defined as the weather-resistant surface, flashing and accessories above the roof deck. A specialty registration does not cover structural work unless a licensed builder or general contractor supervises it. If a roof quote includes decking or framing repairs, ask who holds the license for that part.

The other board, and where $10,000 comes from

A second body, the Contractor's Licensing Board, licenses general and mechanical contractors for work over $10,000. That figure was raised from $5,000 in 2023 and is sometimes quoted as if it applied to home repairs. The $500 and $5,000 residential thresholds sit in a different chapter of the law. If a company shows you a license from this board, it has its own lookup, listed below.

What the list leaves out

Fence, gutter and window installers are not named in the specialty list. Whether a job falls under a listed trade such as carpentry is a question for the Commission, at 803-896-4696. We have not confirmed an answer, so we do not give one.

If the contractor is not licensed or registered

Working without the required South Carolina license or registration is a misdemeanor. The law also bars an unlicensed contractor from filing a mechanics' lien or suing to enforce the contract. The exemption for homeowners working on their own house does not allow an owner to hire an unlicensed person.

The same job on each side of the line

Roof replacementDiffersNorth Carolina: general contractor license only at $40,000 or more. South Carolina: roofer registration over $500, and a bond over $5,000.
Heating and cooling replacementLicense in bothNorth Carolina: state license at any price. South Carolina: specialty license, by examination, over $500.
Plumbing and electrical workLicense in bothNorth Carolina: a state board for each trade. South Carolina: specialty license, by examination, over $500.
Siding or flooringDiffersNorth Carolina: general contractor license only at $40,000 or more. South Carolina: vinyl and aluminum siding installers and floor covering installers register over $500.

How to look up a license

Ask for the license or registration number and the exact name it is under. Then use the state's own search.

  1. North Carolina general contractors: Licensing Board for General Contractors license search.
  2. North Carolina heating, cooling and plumbing: Plumbing, Heating and Fire Sprinkler board license search.
  3. North Carolina electrical: Board of Examiners of Electrical Contractors license search.
  4. South Carolina residential builders and specialty contractors: Residential Builders Commission licensee lookup.
  5. South Carolina general and mechanical contractors: Contractor's Licensing Board licensee lookup.

What to check on the result

  • The name matches the business or person on your quote.
  • The status is current, not lapsed or inactive.
  • The classification or trade covers the work you are buying. A South Carolina siding registration does not cover a roof.

How QuoteFlash handles this

QuoteFlash matches homeowners with up to five local contractors who are insured, and licensed where the state requires it. The wording is deliberate: what the state requires depends on the trade, the price and which side of the line you are on. You describe the project to our agent, written quotes arrive in one place, and the agent explains how they differ. Contractors pay when they are matched. You pay nothing. We still suggest looking up the number yourself.

License questions

Do roofers need a license in North Carolina?

At $40,000 or more, yes: the job needs a licensed general contractor. Below $40,000 the general contractor law does not apply, so a roofer on a smaller job may not hold a state license. Check the business name, liability coverage and written scope instead.

Does a heating and cooling installer need a license for a small job?

In North Carolina, yes. The law sets no dollar minimum and exempts only minor repairs that leave the fuel, energy source, venting and piping unchanged. In South Carolina a heating and air conditioning specialty license applies to work over $500.

I live in Fort Mill. Can I hire a Charlotte contractor?

Yes, if the contractor holds the South Carolina license or registration for that trade. The house is in South Carolina, so South Carolina's rules apply, and a North Carolina license number on the quote does not answer the question. Ask for the South Carolina number and look it up. The reverse applies to a South Carolina company quoting a heating and cooling job in Charlotte.

What can a licensing board do if the job goes wrong?

Less than most people expect. North Carolina's general contractor board says it cannot order repairs, refunds or fines. Recovering money is a court matter.

Does QuoteFlash share my phone number with every contractor?

No. You verify your phone by text code so we know the request is real, compare the written quotes, and choose which contractors get your number.

One minute now. Up to five quotes to compare.

Get my quotesFree, no obligation, and you choose who gets your number
Contractor in the Charlotte area?Get matched with verified homeowners who are ready for quotes.
Apply for your area