These figures cover about 8,400 single-family homes inside the Town of Fort Mill. Most homes with a Fort Mill mailing address are outside town limits and are not counted. That line matters for permits too, as explained below.
The newest housing of any town we cover
Half the homes inside town limits were built in 2016 or later, so they are ten years old or less. Seven in ten were built in 2010 or later. No other town around Charlotte that we have figures for is this new.
For most Fort Mill homeowners, then, a heating and cooling problem is a problem with the builder's original system in its first decade or so. That is usually a repair conversation. If a contractor goes straight to replacement, ask what failed, ask for the repair price in writing, and ask whether a manufacturer parts warranty still applies. Terms vary by brand and registration, so have the contractor look it up.
Where replacement is more likely
The other three in ten homes were built before 2010. About one in eight dates from the 2000s and about one in six from before 2000. If equipment in those homes is original and was made before 2010, it may run on R-22, a refrigerant that has not been made or imported in the United States since January 1, 2020. Existing R-22 systems can still be serviced. For every home built before 2025, a new system will use a different refrigerant from the old one, because federal rules changed which refrigerants can go into newly installed systems from January 1, 2025. Ask how the quote handles the existing refrigerant lines.
Size, and what we do not know
The median home size is 2,646 square feet. Homes of that size often have more than one system, so count the outdoor units and say which one needs attention. We have no figures on how Fort Mill homes are heated. If the outdoor unit runs while the heat is on, you have a heat pump. If there is a furnace with a flue and a gas line, you have gas heat and a separate air conditioner.
What to check on a Fort Mill quote
- The repair price beside the replacement price, if the home was built since 2010.
- Any warranty still in force on the existing equipment.
- Which system is being priced, with model numbers.
- The mechanical permit, named as included.
- The contractor's South Carolina license and Town of Fort Mill business license.
The complete quote checklist is on our heating and cooling page, which also explains system types. For the general method, see how to read a contractor quote.
Permits and licensing in Fort Mill
Inside town limits, permits come from the Town of Fort Mill Building & Codes Department, 205 N. White Street (803-547-2034). The Town lists replacement of heating and air conditioning equipment among the work that needs a permit. It also says homeowners may obtain permits for work on their own home except for mechanical and gas installations, so the contractor has to obtain this one.
South Carolina law treats heating and air conditioning installers as residential specialty contractors on jobs over $500 and requires them to hold a state license issued after an examination. The office that issues permits must refuse one unless the applicant shows that license. The Town adds two requirements of its own: everyone working in Fort Mill needs a Town business license, and mechanical work over $5,000 requires a South Carolina Mechanical Contractors License. Ask for the license number and type, and check it with the state before you sign.
If your address is outside town limits, the Town's office is not your permit office. Ask your county building department, and ask your contractor which office they will apply to. We have not confirmed the county's rules and do not state them here.
How QuoteFlash fits in
QuoteFlash is free for homeowners. You describe the house and the system to our agent, which works for you, and verify your phone by text code. You are matched with up to five local heating and cooling contractors who are insured, and licensed where the state requires it. Their written quotes arrive in one place and the agent explains the differences. Contractors pay when they are matched.