Homes in Fort Mill at a glance
These figures cover about 8,400 single-family homes inside the town limits. Most addresses with a Fort Mill mailing address are outside the limits, in unincorporated York County, and are not counted. Size is the median home size on record, which may not be heated area alone. We have no figures for stories or heating type here.
When homes were built
Of the homes with a build year on record:
- Before 1990: about 7 percent
- 1990s: about 9 percent
- 2000s: about 13 percent
- 2010 or later: about 71 percent
What the age of homes here means
- Built in 2010 or later, about seven homes in ten. These houses are 16 years old or less. Age is rarely the reason for a project. Most work on them is something added or changed: a fence, a deck, flooring, a bathroom. If a roof or a heating and cooling system has a problem this early, ask for a repair quote and check the warranty before you price a replacement.
- Built in the 2000s, about one home in eight. Original roofs and systems are 17 to 26 years old.
- Built before 2000, about one home in six. At 27 years or more, what matters is the age of the current roof and equipment, not the house.
We do not publish how long a roof or a system should last, because it depends on the product and how it was installed. The age is the fact. A contractor who looks at it can tell you the rest.
What size means
The median home size is 2,646 square feet. On a house that size, flooring, siding and window quotes involve large quantities, and the house may be served by more than one heating and cooling system. Count the outdoor units, and note how many stories you have, before asking for quotes.
Permits and approvals: town limits come first
Fort Mill is in South Carolina, and the first question is whether your address is inside the town limits or in unincorporated York County, because that decides which office you deal with. South Carolina's permit and contractor licensing rules are not the same as North Carolina's. We have not confirmed them project by project, so we do not state them. Ask each contractor to write in the quote whether a permit is needed, which office issues it and who applies.
One thing the town does publish: a checklist for fences and privacy walls. It asks for a site plan showing the fence's height, type and location, its distance from structures and property lines, and any easements and sight triangles. If the fence crosses a stormwater drainage easement in a subdivision, the town asks for a letter from the HOA, and if it ties into a neighbor's fence, a signed letter from that neighbor.
Projects we quote in Fort Mill
- Roof replacement quotes in Fort Mill
- Heating and cooling quotes in Fort Mill
- Area-wide pages: windows and doors, water heaters, siding and gutters, bathrooms, flooring, fences and decks
The permit and license sections of our area-wide project pages describe North Carolina law. Use them for the quote checklists only.