In Charlotte's residential neighborhood zoning districts a fence may be up to five feet high in the front setback, six feet in the side setback and eight feet in the rear setback. A fence along a city street also needs a free certificate from the Charlotte Department of Transportation. Your HOA may set tighter limits than the city. Cost is driven by length, height, material, gates and ground conditions. We do not print a price per foot because we have not found one with a method behind it.
Charlotte's height limits
These come from the fence and wall section of Charlotte's Unified Development Ordinance, the city's zoning ordinance, as read in November 2026. They apply in the Neighborhood 1 and Neighborhood 2 zoning districts and the manufactured home park district.
Four details in the same section matter in practice:
- Posts. The cap of a fence post or column may extend up to two feet above the height limit.
- Retaining walls. When a fence sits on top of a retaining wall, its height is measured on the high side, where the fill is.
- Drainage. No fence may be built in a storm drainage easement in a way that blocks or materially impedes the flow of stormwater.
- Corners. No fence may obstruct a sight distance triangle, the clear area the city protects at intersections.
The limits are written in terms of setbacks, which are zones measured on your lot, not simply "front yard" and "back yard." The five-foot limit applies in a setback along any street frontage, so on a corner lot it can apply along the second street too. If you are unsure where a setback line falls on your lot, ask Charlotte Planning before the fence is laid out, not after.
Materials
The ordinance lists permitted fence materials, including wood, vinyl, brick, stone, wrought iron, aluminum or steel made to look like wrought iron, and chain link. It also says fences in Neighborhood 1 districts are not limited to that list. Chain link with slats or fabric cannot be used to meet a screening requirement.
The street-side certificate
Charlotte requires a Fence and Wall Certificate for any fence or wall built along a city street. The city issues it at no cost, in place of a permit, through the Charlotte Department of Transportation, and the application needs a drawing of the location. The city says the certificate does not apply to fences elsewhere on private property, such as those entirely within back or side yards. The contact is 704-336-4119.
Separately, the zoning ordinance says a fence placed inside the public right-of-way needs certification or an encroachment agreement: from the city's transportation department on a city-maintained street, or from the North Carolina Department of Transportation on a state-maintained one. Where your lot ends and the right-of-way begins is not always where the sidewalk or the curb is.
The city also states that exact lot lines must be determined in the field by a surveyor licensed in North Carolina. A fence built a foot over the line is the most expensive kind of fence mistake.
The three approvals people mix up
An HOA can require you to remove a fence that meets every city rule. If you have one, apply first and order materials after approval. Our guide to HOA approval for exterior projects sets out what to submit.
Outside Charlotte city limits
The numbers above are Charlotte's. Huntersville, Cornelius, Davidson, Matthews, Mint Hill, Pineville and the towns in neighboring counties each have their own zoning rules, and their limits may differ from the city's. We have not yet confirmed each town's figures at its own ordinance, so we do not list them here. Call your town's planning office and ask for the fence height limits for your zoning district, in writing if you can get it.
What drives the cost of a fence
Fence contractors price by the linear foot, then add for everything that is not a straight run on level ground.
- Length. Measured along the fence line, not the lot perimeter. Two contractors who measure the same yard and get different lengths should both be asked how they measured.
- Height. A taller fence uses more material and longer, deeper-set posts.
- Material and style. Chain link, wood picket, wood privacy, vinyl, aluminum and composite sit at different price levels. Within wood, the species, the board thickness and the style, such as shadowbox or board-on-board, change the amount of lumber.
- Gates. Each gate adds posts, hardware and labor. Wide double gates for vehicles or mowers cost more than a walk gate.
- Ground. Slopes, rock, tree roots and wet ground slow post setting. A sloped yard also forces a choice between stepping the panels and following the grade, which changes labor.
- Removal. Taking out and hauling away an old fence is often a separate line, or missing.
- Clearing. Brush or vines along the line.
- Finish. Staining or sealing wood is rarely included unless you ask.
What a complete fence quote lists
- Total linear feet and height, with a sketch of the fence line
- Material, grade and style, and post size and spacing
- How posts are set and how deep
- Number, width and location of gates, and the hardware
- Removal and disposal of the old fence, if any
- Who marks the lot line, and whether a survey is assumed
- Who has underground utilities located before digging
- Who files the street-side certificate and the HOA application
- Warranty on materials and on workmanship
- What happens if rock or roots are hit
Our guide on how to compare contractor quotes covers payment schedules and the rest.
How QuoteFlash fits in
Tell our agent about the fence: rough length, height, material and whether you have an HOA. The agent works for you. It matches you with up to five local contractors who are insured, and licensed where the state requires it, and their written quotes arrive in one place with the differences explained. You choose which contractors get your phone number. It is free for homeowners; contractors pay when they are matched. See fence and deck quotes in the Charlotte area.